EW system performance verification using field RF environment emulation.

It worked well in an echo-free laboratory, but you may have experienced several systems that showed unexpected performance in the field.

This is because the synthetic RF of the laboratory does not reflect fidelity, complexity, and reality in simulating the actual field electromagnetic operating environment (EMOE).

Unless you plan to place an RF system in an echo-free room, the test should be conducted in the same environment in which the actual system operates.

Commonly used RF test equipment, such as vector signal generator (VSG) or radar simulator, cannot produce high-density, congested EMOEs close to reality.

D-TA's EMOE emulation recording and reproduction system can be controlled at up to 1 GHz IBW in the 1 MHz–40 GHz frequency band and signal generation and reproduction from unlimited storage devices without repeatedly reproducing the same data.

EW system test using MRSE-5000

The I/Q data streaming method has significant advantages compared to the existing DDS-based approach.

The DDS method relies on PDW data that can generate only one signal at a time to generate radar pulses

Communication signals, radars, interference signals, and noise signals may be expressed as I/Q time series data.

The I/Q streaming method allows overlapping regardless of how many time series data there are, and allows unlimited emeters to be generated in each frequency band without missing signals.

This makes it easy to create a crowded electromagnetic environment that reflects a real threat environment that includes various signals.

D-TA's MRSE-5000 series emulator is the only emulator on the market that can do this

MRSE software enables integration of threat signal waveforms, operation mode editing and antenna beam and scan patterns, and platform motion using all built-in tools.

In addition, I/Q data can be stored in the local storage device through commands on each MRSE server. You can also start the test by executing the playback command

Small ELINT/ESM solution for ground, sea, and aviation UAV.

D-TA's latest MFEL-5000 ELINT/ESM solution uses an ELINT/ESM receiver that can be mounted directly on the mast regardless of antenna type.

The dual channel receiver (DTA-9590N) may be interlocked with various antennas

This receiver, located next to the antenna, performs RF signal reception, digitization, and baseband conversion on I/Q data in the entire band and transmits data to the signal processing processor (DTA-5000 RAID server) over a 40GbE optical network

The MFEL-5000 ELINT/ESM system uses a rotary DF antenna for ground and sea purposes, and a double spiral antenna for mono-pulse DF within the UAV POD